50G QSFP+ ER4 40Km 1310nm LC Optical Transceiver

50G QSFP28 LR4 optical transceiver module, support 50Gb/s and up to 10 km transmission on SM fiber, it works in high-speed IDC connection solutions, and 5G network mid-haul solutions, and so on.

RSFP56-50G-LR is a 1310nm DFB laser based 50Gb/s SFP56 transceiver. It is designed to transmit and receiver optical data up to 10km over single mode fiber. The transceiver is compliant with SFF-8472, SFF-8402, SFF-8432 and applicable portions of SFF-8431. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472.

8 * 10/100/1000Mbps RJ45 ports+ 2 * Gigabit SFP ports FWPS2008G is a fully gigabit network managed PoE switch, which can meet the PoE power supply requirements of WIFI AP, IP camera, WIFI bridge, IP phone and other types of equipment. The product adopts a new generation of high-performance hardware and software platform, provides flexible, cost-effective full gigabit access and uplink ports, supports three-layer routing protocols, complete security protection mechanisms, perfect ACL/QoS policies and rich VLAN functions, is easy to manage and maintain, and meets users' networking needs for easy management, high security and low cost of network equipment. It is suitable for network access, convergence Core multiple application scenarios.

The rack-mounted optical switch consists of 24 1X2 optical switches, enabling control over the switching of 24 1X2 optical fiber channels. The device is equipped with an Ethernet RJ45 and TYPE-C communication interface, allowing for control via commands or keys. It plays a crucial role in various optical communication applications including multi-channel optical monitoring in optical transmission systems, LAN multi-light source/detector automatic switching, and dynamic monitoring systems for optical sensors. Additionally, it is utilized in the testing of optical fibers, devices, networks, field engineering cables as well as the installation and adjustment of optical devices.

Single channel 3 port 1625nm OTDR filter, works in OTDR system Low insertion loss High channel isolation Low polarization dependent loss Exceptional reliability and stability

The 100G LR1 SFP56-DD optical transceiver, 100G SFP56-DD LR1 is designed for using in 100-Gigabit Ethernet links up to 10km over Single-Mode Fiber (SMF). It is compliant with the SFP56-DD MSA,IEEE802.3CU,100G Lambda 100G LR1 and 100GAUI-2(no FEC)1. Digital diagnostics functions are available via the I2C interface, as specified by the SFP56-DD MSA. The module incorporates 1 channel optical signal, on 1311nm center wavelength, operating at 100Gbps data rate. This module can convert 2 channels of 53Gbps (PAM4) electrical input data to 1 channel of 106Gbps (PAM4) optical signal, and also can convert 1 channel of 106Gbps (PAM4) optical signal to 2 channels of 53Gbps (PAM) electrical output data. The optical interface uses a Duplex LC connector. The high performance cooled EML transmitter and high sensitivity PIN receiver provide superior performance for 100Gigabit Ethernet applications up to 10km links.

Features Low Loss and High Reliability Serial Interface (RS-232)  Modularized Design Epoxy-free on Optical Path Applications Ring Network Remote Monitoring in Optical Network Testing of Fiber Optical Component

SFP+ 10G BIDI 80KM optical transceiver module, support 10Gb/s and up to 80 km transmission on one core fiber. It works in high-speed IDC connection solutions, 5G network front-haul solution, network switch, PTN, OTN and so on. Features: Supports 9.95 to 11.3Gb/s bit rates Hot-Pluggable Single LC for Bi-directional Transmission cooled EML transmitter, APD photo-detector SMF links up to 80km 2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface Power Supply :+3.3V Power consumption<3W Temperature Range: 0~ 70°C RoHS compliant