Idle Fiber Resource Management System

Idle Fiber Resource Management System

Product Features:

The 1U chassis can access 48 cores and support 24 dual-core services.

Services and detections can be accessed simultaneously without affecting each other.

The normal communication of services will not be affected even when the device is powered off (or malfunctions).

Real-time Monitoring and Status Analysis

    -Optical Fiber Status Monitoring: Monitor the line loss status of the optical fiber link in real time.

    -Fault Early Warning: Automatically identify potential problems in the optical fiber link and issue alarms in a timely manner to help maintenance personnel respond quickly.

  • Product Detail

 

Idle Fiber Resource Management System: Intelligent Optimization, Efficient Management, Unleashing the Potential of Optical Fibers

 

IFMS-24-1U/IFMS-48-1U

 

Idle Fiber Resource Management System

 

In today's digital era, optical fiber networks have become the backbone of information transmission. However, with the continuous expansion of the network scale and the increasing complexity of business requirements, the efficient management of optical fiber resources has become a crucial challenge. There are a large number of underutilized optical fiber resources in many networks. These "idle optical fibers" not only lead to resource waste but also increase the operation and maintenance costs. To address this issue, Fiberwdm has launched the Idle Fiber Resource Management System (IFRMS), which aims to help you manage optical fiber resources efficiently, optimize network performance, and reduce operating costs.

 

The Idle Fiber Resource Management System (IFRMS) is an intelligent management platform specifically designed for optical fiber networks. Through advanced optical fiber detection technology, intelligent analysis algorithms, and automated management tools, it helps you comprehensively monitor the status of the optical fiber network, quickly identify idle optical fiber resources, and provide optimization and scheduling suggestions. This system can not only significantly improve the utilization rate of optical fiber resources but also enhance the reliability and flexibility of the network, bringing unprecedented convenience and efficiency to your communication network management.

 

Product Features:

 

The 1U chassis can access 48 cores and support 24 dual-core services.

Services and detections can be accessed simultaneously without affecting each other.

The normal communication of services will not be affected even when the device is powered off (or malfunctions).

Real-time Monitoring and Status Analysis

    -Optical Fiber Status Monitoring: Monitor the line loss status of the optical fiber link in real time.

    -Fault Early Warning: Automatically identify potential problems in the optical fiber link and issue alarms in a timely manner to help maintenance personnel respond quickly.

 

Intelligent Resource Management System:

 

Support for Permission Management: Set functions and divide regions for users with different permissions.

Support for managing the in-use, idle, and current status of optical cable cores, and it can display the loss situation of the cores.

Support for the unified management function of resources such as the site information and identification of the optical cable network.

Support for the alarm positioning function. It supports secondary alarms and allows setting the loss warning threshold and alarm threshold.

Support for the historical curve graph of optical cable loss; support for tracking and recording the optical routing curves of different times and different optical cable segments.

Support for the unified management function of fault alarm information, including functions such as alarm type management, alarm query, and alarm cause.

Support for remote management. Manage the optical fiber network anytime and anywhere through the Web interface or mobile application to improve the operation and maintenance efficiency.

 

Specification Parameters:

 

Parameters

Unit

Specification

Size of device

mm

44×300×144

Max power dissipation

W

5

Channel number

CH

Max support 48 core (24 send 24 receive)

Optical power detection wavelength

nm

SM-1610

Service access working wavelength

nm

SM-1310/1550

Insertion loss

dB

≤1.0 

Optical power detection range

dBm

-40 ~ +1 

Optical power detection accuracy

 

± 5%

Resolution

dB

0.01

Output power

dBm

-5 ~ 0 

Short-term output stability

 

±0.05dB /15min

Long-term output stability

 

±0.1dB / 8h(20°C)

Optical output mode

 

Continuous output

Fiber type

 

SM(9/125um

Interface type

 

LC/PC,MPO/PC

Working temperature

-5 ~ + 55

Storage Temperature

-20 ~ + 70

Relative humidity

 

5% ~ 95% Noncondensing

 

Network Management Interface:

 

Idle Fiber Resource Management System

Build a unified platform for the management of idle optical fiber resources

 

Ordering information:

 

Equipment Model

Specification

IFMS-24-1U-A

24-core (12 cores for transmitting and 12 cores for receiving) Idle Fiber Detection System (Unified Platform Software V1.0 for Idle Optical Fiber Resources Management), without service access. The single-mode detection range is 120KM. Connector type: LC/UPC. Power supply: single power supply, either 220V AC power supply or 48V DC power supply. 1U chassis.

IFMS-24-1U-B

24-core (12 cores for transmitting and 12 cores for receiving) Idle Fiber Detection System (Unified Platform Software V1.0 for Idle Fiber Resources Management). It can simultaneously access 24 channels of services. The operating wavelength is 1310/1550nm. The single-mode detection range is 120 kilometers. Connector type: LC/UPC. Single power supply, either 220V AC power supply or 48V DC power supply. 1U chassis.

IFMS-48-1U-A

48-core (24 cores for transmitting and 24 cores for receiving) Idle Fiber Detection System (Unified Platform Software V1.0 for Idle Fiber Resources Management), without service access. The single-mode detection range is 120KM. Connector type: LC/UPC. Single power supply, either 220V AC power supply or 48V DC power supply. 1U chassis.

IFMS-48-1U-B

48-core (24 transmitting cores and 24 receiving cores) Idle Fiber Detection System (Unified Platform Software V1.0 for Idle Fiber Resources Management). It can simultaneously access 24 channels of services with an operating wavelength of 1310/1550 nm. The single - mode detection range is 120 km. It uses LC/UPC connectors. It has a single power supply, which can be either a 220V AC power supply or a 48V DC power supply. It comes in a 1U chassis.

 

Want to know about this product?

SEND A MESSAGE
Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Related Products
10Gb/s 100km CWDM SFP+ Transceiver 10Gb/s 100km CWDM SFP+ Transceiver Hot Pluggable, Duplex LC, +3.3V, 1470~1550nm, CWDM EML&APD, Single mode
Applications:   10GBASE Ethernet Sonet OC-192/SDH 10G Fibre channel CWDM Networks
POB48 Series Parallel Optical Transceiver Module POB48 Series Parallel Optical Transceiver Module
The POB48 series parallel optical transceiver module is designed for defense communication command systems and subsystems, enabling bidirectional conversion between multi-channel electrical and optical signals. The module adopts a hermetically sealed micro-socket package structure, featuring a spring-loaded crimp-style electrical connector and a 48-core MT/MPO optical interface. It operates within a case temperature range of -40°C to +85°C, supporting single-channel transmission rates from 1.25 Gbps to 10.3125 Gbps.
1310/1490 1577/1270 WDM MUX Broadband PON Network Single-Line Dual-Access Device FW-P801
Single-line dual-access - product features:   Easy to install and concealed: Single-line dual-access is a passive device with a low failure rate;  Small in size and can be used in a variety of ways fast installation in complex environment, strong concealment. Low insertion loss:The insertion loss of single-line dual-access devices is < 1.6dB, and the line margin is within the range after going online.
EDFA Optical Amplification Card EDFA Optical Amplification Card
Product Features   Supports optical amplification for C-band DWDM systems. Supports amplification with OSC signal input. Supports maximum saturated output power of +23dB and minimum input power of -35dB. Supports power amplification, line amplification (two-stage optical amplification), and pre-amplification. Monitoring capabilities include: pump drive current, pump output power, pump switch status, pump temperature, input optical power, output optical power, and module temperature. Supports configuration of pump switch, AGC mode, and APC mode (adjustable input/output optical power). Supports SNMP-based unified network management platform with management options including CLI (telnet and console), Web, and NetView (graphical interface). Includes optical monitoring port (MON).
Dual-Channel 10KHz Unit Detector PDA1000-2 Dual-Channel 10KHz Unit Detector
This series of detectors has basically the same usage method as the unit detectors of Thorlabs and Newport, and their power interfaces are completely identical. When the Monitor output (available on some products of Thorlabs and Newport) is not required and the bandwidth is the same, it can be directly replaced, and its performance in all aspects is not inferior to that of similar products from Thorlabs and Newport. In addition to detectors with existing specifications, customized services are also provided. We can adjust various indicators of the detector (such as supply voltage, gain, bandwidth, etc.) according to customer needs to meet customer requirements.
China M1x8 Magnet Fiber Optical Switch M1x8 Magnet Fiber Optical Switch
Features Solid-state high speed High Stability, High Reliability Epoxy-free on Optical Path Fail-safe latching Applications Aerospace equipment Configurable Add/Drop System monitoring Sensing system
3G-SDI to Fiber Converter Mini-type 3G-SDI to Fiber Converter with Tally or Reverse RS485
Features Each channel includes 8-channel audio embedded. Automatic cable equalization, used for all rate below 3.2 Gb/s (Belden 1694A). Automatic reclocking 270Mbit/s - 1.48Gbit/s - 3Gbit/s Directly compatible with HD-SDI camera systems Long transmission capability up to 80 km Hot swap and hot plug. Handle all Pathological patterns, fully digital non-compression broadcast level transmission. LED Status Indication to monitor the working conditions. super optic dynamic range and free of adjustment. 1470~1610nm CWDM wavelengths optional. industry level ultra-broad temperature range (-20℃~+70℃), adaptable to various environments.
25G SFP28 Transceiver 25G SFP28 CWDM Optical Transceiver
25G SFP28 CWDM optical transceiver module, support 25Gb/s and up to 10 km transmission, it works in high-speed IDC connection solutions, 5G network front-haul solution, and so on.
Leave A Message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

about

contact