1650nm FBG Reflector SC/APC

The  fiber  brag  grating  reflector( FBG  Reflector)  is  a  low-cost  specific  band  reflector mounted on the optical network unit (ONU) side. It can reflect light pulses ( 1650 +/- 5 nm) from the OTDR on the fiber line terminal (OLT) side nearly 100%, while the working bands of the passive optical network (PON) are transmitted normally. The OTDR can determine whether the  fiber  line  is  normal  by  detecting  the  signal  reflected  by  the  fiber  grating reflector. When the reflected signal is lower than the normal value, the line loss is too large; when the reflection value is 0, the optical fiber line is broken 。Therefore, we can maintain the fiber line in time by the real-time monitoring of the fiber line.

  • Product Detail

1650nm FBG Reflector SC/APC

 

Characteristics

 

  • High stability and reliability
  • Remote real-time detection
  • Low insertion loss
  • Easy connection for adapter structure
  • Compliant with Telcordia GR-326-CORE, Telcordia GR-1221-CORE
  • Compliant with RoHS

 

Application

 

Detection and maintenance of Passive Optical Network lines (applied to FTTx).

 

1650nm FBG Reflector SC/APC

Optical parameter

 

item parameter specification unit Remarks
1

wavelength range

Pass band 1260~ 1625 nm  
Reflect band 1644.5~ 1655.5 nm  
2 Pass band IL ≤1.4 dB @1260~ 1360
≤1.4 dB @1460~ 1600
≤3.4 dB @1600~ 1625
ORL >35 dB @1260~ 1580
>30 dB @1580~ 1620
>20 dB @1620~ 1625
3 Reflect band IL >21 dB @1644.5~ 1655. 5
ORL ≤1.0 dB @1644.5~ 1655. 5
4 PDL ≤0.4 dB @1260~ 1600
5 Ripple ≤0.6 dB @1644.5~ 1655. 5
6 TDL ≤0.5 dB @1260~ 1600
7 Max Optical Power Handling 27 dB  
8 Plug Times >500 Times  
9 Connector SC/APC    

 

Structure

 

The FBG reflector adopts a standard SC connector structure, and its external dimensions are as follows:

 

1650nm FBG Reflector SC/APC

Working/storage conditions

 

parameter specification unit
Working temperature -25 ~ +65 °C
Working humidity 5~95 %RH
Storage temperature -40 ~ +85 °C
Storage humidity 5~95 %RH

 

Want to know about this product?

SEND A MESSAGE
Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Related Products
1650nm Reflector LC/APC 1650nm Reflector LC/APC
High stability and reliability Remote real-time detection Low insertion loss Easy connection for adapter structure Compliant with Telcordia GR-326-CORE, Telcordia GR-1221-CORE Compliant with RoHS
3CH WDM GPON XGS-PON And OTDR Plug-in LGX Box 3CH WDM GPON XGS-PON And OTDR Plug-in LGX Box 215*150*20MM
With the rapid development of 5G, IoT, and cloud computing, bandwidth demand is growing continuously. To meet this demand, Passive Optical Network (PON) technologies (mainly GPON and XGS-PON) are evolving. OTDR is a tool for network fault diagnosis and maintenance. Via 3CH WDM technology, these technologies can coexist on the same fiber, enhancing network bandwidth and flexibility.
8ch  DWDM MUX DEMUX OADM Dual Fiber 8CH C29-C36 DWDM OADM, WEST TO EAST
IL<2.7dB , 100GHZ DWDM OADM MUX DEMUX Multiplexing of 8 Channels Drop and Add, over a Dark Fiber Network Fully Compatible with All ITU-T 1G/10G/25G/40G/100G DWDM Optics Passive devices, No Power No Cooling Required Support Metro, Regional and Long Haul DWDM Networks
QSFPDD 200G PSM8 10km QSFPDD 200G PSM8 10km Optical Transceiver (MPO16)
The FiberWDM Technologies RQD-200G-16P8-10 is a Eight-Channel, Pluggable, Parallel, Fiber-Optic QSFP DD PSM8 for 2×100 Gigabit Ethernet , Infiniband DDR/EDR Applications. This transceiver is a high performance module for data communication and interconnect applications. It integrates eight data lanes in each direction with 208 Gbps bandwidth. Each lane can operate at 26Gbps up to 10km over G.652 SMF. These modules are designed to operate over single mode fiber systems using a nominal wavelength of 1310nm. The electrical interface uses a 76 contact edge type connector. The optical interface uses an 16 fiber MTP (MPO) connector. This module incorporates FiberWDM Technologies proven circuit and Optical technology to provide reliable long life, high performance, and consistent service.
CWDM filter 3 Port CWDM filter CWDM ITU Component
Single channel 3 port CWDM filter, 1270nm~1610nm waves. Low insertion loss High channel isolation Low polarization dependent loss Exceptional reliability and stability
2CH CWDM OADM Dual Fiber Dual Fiber 2CH CWDM OADM West And East, DIN Mounting Box
The 2ch CWDM OAMD is designed by FIBERWDM, wavelength from 1270nm to 1610nm, and it is passive CWDM device, dual fiber, support 2channels difference business to west, and 2channels difference business to east( drop and add 2channels to difference side. It works in Broadcast and TV, IDC, finance, government, cloud, massive data and other industries, where the optical fiber resource are rare.  
150GHz 8CH DWDM MUX DEMUX C26-H36 150GHz 8CH DWDM MUX DEMUX C26-H36(1556.555nm-1548.115nm) with Monitor Port,LC/UPC,LGX Box, and 4 Slots 1U Rack
The 150GHz 8ch DWDM MUX DEMUX is designed by FIBERWDM, wavelength from C26-H36(1556.555nm-1548.115nm), in accordance with the ITU 150GHZ grid, it maximizes the capacity of the C-band range.   The 150GHz 8ch DWDM is totally passive DWDM device, and support low insertion loss( wavelength ports<2.4dB), Support 800G x 8ch business in DWDM transfer system.
1650nm Reflector LC/APC 1650nm Reflector LC/APC
High stability and reliability Remote real-time detection Low insertion loss Easy connection for adapter structure Compliant with Telcordia GR-326-CORE, Telcordia GR-1221-CORE Compliant with RoHS
Leave A Message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

about

contact