16 Group1x4(4x1) Fiber Optical Switch, SM, 1310/1550nm MPO16/APC 1U Chassis

FW2600-16OS14-MP rack-mount optical switching equipment consists of 16 units of 1×4 optical switches. It enables controllable optical path switching for selecting one MPO16 optical interface out of four MPO16 optical interfaces (4-to-1 selection or 1-to-4 switching). The unit supports flexible network management: switching can be configured via a graphical web-management GUI over the RJ45 Ethernet port, or controlled by upper-level hosts through program commands.

 

An optical switch routes, switches and selects optical signals directly in the optical domain without any-to-electrical-to-optical conversion. It supports optical-path protection switching, dynamic scheduling and multi-channel selection. It is widely deployed in optical communications, AI computing, test & simulation, optical sensing and other applications.

  • Product Detail

Optical Switching Equipment: FW2600-16OS14-MP

16 Group1x4(4x1) Fiber Optical Switch, SM, 1310/1550nm MPO16/APC 1U Chassis

 

Product Features

 

  • Low insertion loss and fast switching speed.
  • Controlled via Ethernet interface with networking capability. Multiple units can be centrally managed through a graphical interface for simple and convenient operation.
  • LCD display for intuitive viewing of user name and IP address.
  • Transparent transmission of compliant incoming optical signals.
  • Compatible with single-mode fiber types: G.652, G.653, G.655, G.657.
  • Power-off memory (latching) function.

 

Performance Specifications

 

Item Parameter
Model FW2600-16OS14-MP
Operating Wavelength SM: 1260-1620nm
Test Wavelength 1310nm / 1550nm
Insertion Loss ≤ 1.5 dB
Repeatability ≤ ±0.02 dB
Return Loss ≥ 50 dB
Crosstalk ≥ 55 dB
Wavelength-Dependent Loss (WDL) ≤ 0.25 dB
Polarization-Dependent Loss (PDL) ≤ 0.05 dB
Temperature-Dependent Loss (TDL) ≤ 0.2 dB
Switching Time ≤ 12 ms
Service Lifetime ≥ 10⁷ cycles
Fiber Type Single-Mode (9/125μm)
Optical Connectors COM-A: MPO16/APC (Female); B1-B4: MPO16/APC (Male)
Management Interface RJ45
Fault Protection Power-off memory (latching)
Power Supply AC: 110-260 V
Operating Temperature −10 ℃ ~ +60 ℃
Storage Temperature −40 ℃ ~ +85 ℃
Chassis 19-inch standard 1U rack-mount (482 × 390 × 44 mm)

 

Optical Path Diagram

 

16 units of 1×4 optical switches

Switching Logic

 

Port A can connect to any one of ports B1, B2, B3 and B4. Only one path is active at any time.

· State 1: MPO16 A ↔ MPO16 B1

· State 2: MPO16 A ↔ MPO16 B2

· State 3: MPO16 A ↔ MPO16 B3

· State 4: MPO16 A ↔ MPO16 B4

 

Notes:

 

1. Port A is MPO16/APC female, and must mate with MPO16/APC male cables. Ports B1-B4 are MPO16/APC male, and must mate with MPO16/APC female cables. Use single-mode 16-fiber patch cords.

2. This device is not compatible with MPO8 / MPO12 optical interfaces.

 

Device Description

Front-Panel Layout

 

16 units of 1×4 optical switches

 

  • LAN1 / LAN2: RJ45 Ethernet ports for device management communication
  • LCD display: Shows device address and status information
  • Next: Scroll-down navigation button
  • Reset: Reset button
  • RUN indicator: Device operation status LED
  • Con: Console debug port
  • User optical interfaces: Five MPO16-APC optical ports

 

Rear-Panel Layout

 

16 units of 1×4 optical switches

 

  • AC power inlet: AC power input connector

 

Device Dimension Drawing

 

16 units of 1×4 optical switches

 

Want to know about this product?

SEND A MESSAGE
Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Related Products
32×32 Fiber Optical Switch Single-Mode 1310/1550nm LC/UPC 1U Chassis 32×32 Fiber Optical Switch Single-Mode 1310/1550nm LC/UPC 1U Chassis
The FW2600-32X32LCU-A rack-mounted optical switching device consists of MEMS optical switches and enables the switching of optical fiber paths among 32 input channels and 32 output channels. The device features an Ethernet RJ45 communication interface, allowing switching to be controlled via a graphical network management interface; it also provides a set of TCP/IP protocol communication commands. Optical switching devices play a critical role in optical communication applications, primarily in multi-channel optical monitoring and switching within optical transmission systems, test and simulation systems, fiber-optic sensing systems, and the commissioning and testing systems for optical components.
40G QSFP+ DOC cable 40G QSFP+ DAC Transceiver
QSFP28 MSA, Up to 4x 10Gb/s, 40G DAC cable High reliability 850nm VCSEL technology Electrically hot-pluggable Low power consumption Low EMI design
Single Fiber 9Channels(18waves) 1270-1610nm CWDM Single Fiber 9Channels(18waves) 1270-1610nm CWDM MUX DEMUX Port, LC/UPC, Plug-in LGX Box and 4slot 1U Rack
The single fiber 9channels(18 waves) CWDM MUX DEMUX is designed by FIBERWDM, A side’s waves are : RX 1270,1310,1350,1390,1430,1470,1510,1550,1590nm/ TX 1290,1330,1370,1410,1450,1490,1530,1570,1610nm, and B side’s waves are: RX 1290,1330,1370,1410,1450,1490,1530,1570,1610nm/ TX 1270,1310,1350,1390,1430,1470,1510,1550,1590nm; it is passive CWDM device and plug-in LGX box, can plug in 2slot 1u rack, support 9channels difference business in one optical fiber for bi-direction point-to-point transmission.   It works in Broadcast and TV, IDC, finance, government, cloud, massive data and other industries, where the optical fiber resource are rare. 
400G QSFP112 SR4 LPO 400G QSFP112 SR4 LPO Transceiver
FEATURES: Hot-pluggable QSFP112 SR4 multimode transceiver Compliant with QSFP112 MSA Compliant with CMIS Rev 4.0 and above revision Integrated 850nm VCSEL array and PD array w/o DSP or CDR 4-channels of 100G-PAM4 electrical and optical modulation Single MPO-12 APC receptacles  Maximum power consumption 2.8W Single 3.3V power supply Case operating temperature 0°C to 70°C Class 1 laser  RoHS complaint
980 1550 PM Filter 980/1550nm Polarization Maintaining Filter WDM
Low insertion loss High Extinction Ratio High channel isolation High stability and reliability
EDFA Optical Amplifier EDFA Optical Amplifier Module
High output power up to23dBm Flexible control mode High stability and reliability Operating temp. -20~60°C Customizable output power and configuration
PLC 2.0MM 1.0M Fiber DIN Mounting Box 1x4 PLC SC/UPC 2.0MM 1.0M Fiber DIN Mounting Box 120*110*20MM
Fiberwdm’s PLC are developed based on unique silica glass waveguide process with reliable precision aligned fiber pigtail in a miniature package, it provides a low cost light distribution solution with small form factor and high reliability. The PLC devices have high performance in terms of low insertion loss, low PDL, high return loss and excellent uniformity over a wide wavelength range from 1260nm to 1620nm and working in temperature from -40℃ to +85℃. The PLC devices have standard configurations of 1*4, 1*8, 1*16 and 1*32 configurations, as well as customized structures of 2*8, 2*16, 2*32 and 2*64
DWDM filter 3 Port 100GHZ DWDM filter DWDM ITU Component
Single channel 3 port 100GHZ DWDM filter, DWDM C-Band. Low insertion loss High channel isolation Low polarization dependent loss Exceptional reliability and stability
Leave A Message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

about

contact