1.6T OSFP-XD 2*FR4

RO-1T6-2DR4-2 is designed to transmit and receive serial optical data links up to 212.5 Gb/s data rate (per channel) by PAM4 modulation format over single-mode fiber. It is a small-form- factor hot pluggable transceiver module integrated with high performance EML laser. It is compliant with 1600G Ethernet specs and OSFP-XD MSA.

The 1600G OSFP1600 2xDR4 Transceiver is designed to transmit and receive serial optical data links up to 212.5 Gbps data rate (per channel) by PAM4 modulation format over single-mode fiber. It is a small-form-factor hot pluggable transceiver module integrated with high performance Sipho modulator. It is compliant with 1600G Ethernet specs and OSFP MSA.

The 8ch O-BAND DWDM MUX DEMUX is designed by FIBERWDM, it is totally passive DWDM device, and support low insertion loss( wavelength ports＜3.0dB; ). Waves are 1304.58/1305.72/1306.85/1308.00/1309.14/1310.28/1311.43/1312.58nm, support 8CH business on two fiber transmission.

The QSFP112 400GBASE LR4 transceiver module is designed for 400G Ethernet links over 10km of single-mode fiber. The module contains 4 parallel channels at a center wavelength of CWDM, each operating at 106.25G. On the receiver path, 4 photodiodes and a 4-channel TIA array are used, along with PAM4 re-timers.

Features:   Compact design Low insertion loss and low PDL High reliability High channel counts Wide wavelength range Large operating temperature range Customized packaging and configuration

This series of detectors has basically the same usage method as the unit detectors of Thorlabs and Newport, and their power interfaces are completely identical. When the Monitor output (available on some products of Thorlabs and Newport) is not required and the bandwidth is the same, it can be directly replaced, and its performance in all aspects is not inferior to that of similar products from Thorlabs and Newport. In addition to detectors with existing specifications, customized services are also provided. We can adjust various indicators of the detector (such as supply voltage, gain, bandwidth, etc.) according to customer needs to meet customer requirements.

10G CWDM 80KM SFP+ optical transceiver module, support 10Gb/s and up to 80 km transmission. It works in high-speed IDC connection solutions, 5G network front-haul solution, network switch, PTN, OTN and so on. Features Supports 9.95 to 11.3Gb/s bit rates Hot-Pluggable Duplex LC connector 1470～1610nmCWDM EML transmitter, APD photo-detector SMF links up to80km 2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface Power Supply:+3.3V Power consumption<2W Temperature Range: 0~ 70°C

IL<3.5dB , 100GHZ DWDM AAWG Technology Multiplexing of 40 Channels with 1310nm and Monitor a Dark Fiber Network Fully Compatible with All ITU-T 1G/10G/25G/40G/100G DWDM Optics Passive devices, No Power No Cooling Required Support Metro, Regional and Long Haul DWDM Networks