25G SFP28 Optical Transceiver

The SFP28 CWDM(1271~1371nm) optical Transceiver integrates receiver and transmitter path on one module. In the transmit side, one of serial data streams are recovered, retimed, and passed to laser driver. In the receive side, the optical data streams is recovered by a PIN and trans-impedance amplifier, retimed. This module features a hot-pluggable electrical interface, low power consumption. The product is designed with form factor, optical/electrical connection and digital diagnostic interface according to the SFP28 and compliant to IEEE 802.3cc.

25G SFP28 MWDM optical transceiver module, support 25Gb/s and up to 10 km transmission, it works in high-speed IDC connection solutions, 5G network front-haul solution, and so on.

25G SFP28 LWDM optical transceiver module, support 25Gb/s and up to 10 km transmission, it works in high-speed IDC connection solutions, 5G network front-haul solution, and so on.

25G SFP28 DWDM optical transceiver module, support 25Gb/s and up to 10 km transmission, it works in high-speed IDC connection solutions, 5G network front-haul solution, and so on.

25G SFP28 Bi-direcation optical transceiver module, support 25Gb/s and up to 10 km transmission, it works in high-speed IDC connection solutions, 5G network front-haul solution, and so on.

Product Features   Supports up to 25.78Gbps bit rates Hot-pluggable SFP+ footprint Up to 40km for SMF transmission Compliant with SFP+ MSA and SFF-8472 with duplex LC receptacle Compatible with RoHS Single +3.3V power supply2 Real Time Digital Diagnostic Monitoring Operating case temperature: Standard:  0 to +70°C

50G QSFP28 LR4 optical transceiver module, support 50Gb/s and up to 10 km transmission on SM fiber, it works in high-speed IDC connection solutions, and 5G network mid-haul solutions, and so on.

Features Supports 100GBASE-LR1- 10 BIDI Lane signaling rate 106.25Gb/s with PAM4 Up to 10km transmission on SMF EML Laser and PIN receiver 4x25.78Gb/s with NRZ electrical interface (CAUI-4) High speed I/O electrical interface I2C interface with integrated Digital Diagnostic monitoring QSFP28 MSA package with simplex LC connector Single +3.3V power supply Support HW TX_DIS and RX_LOS for telecom application Maximum power consumption 4 W Operating case temperature: 0 to +70 °C Compliant to 802.3cu, SFF-8636&SFF-8679 standard Complies with EU Directive 2015/863/EU Application 100GBASE-LR1- 10 BIDI Transceiver Types: